Latest Cisco 300-410 Dumps for success in Actual Exam Dec-2023]
Realistic 300-410 100% Pass Guaranteed Download Exam Q&A
Cisco 300-410 exam is a certification test that is designed to validate the knowledge and skills of IT professionals who are involved in implementing advanced routing and services in enterprise-level networks. 300-410 exam is part of the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification track and is intended for network engineers, system engineers, and other IT professionals who are responsible for designing, implementing, and maintaining complex enterprise networks.
NEW QUESTION # 290
Which router translates the customer routing information into VPNv4 routes to exchange VPNv4 routes with other devices through MP-BGP?
- A. VPNv4 RR
- B. PE
- C. CE
- D. P
Answer: B
NEW QUESTION # 291
Refer to the exhibit.
An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?
- A. debug ip flow
- B. debug ip routing
- C. debug ip sla error
- D. debug ip packet
Answer: B
Explanation:
Explanation
debug ip routing This command enables debugging messages related to the routing table.
NEW QUESTION # 292
Refer to the exhibit.
An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reason for this error?
- A. The keyword localtime is not defined on the timestamp service command.
- B. An authentication error with the NTP server results in an incorrect timestamp.
- C. The NTP server is in a different time zone.
- D. The system clock is set incorrectly to summer-time hours.
Answer: A
NEW QUESTION # 293 
Refer to the exhibits. All the serial links between R1, R2, and R3 have the same bandwidth. Users on the
192.168.1.0/24 network report slow response times while they access resources on network 192.168.3.0/24.
When a traceroute is run on the path, it shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 is still up.
What must the network administrator do to fix the slowness?
- A. Add a static route on R1 using the next hop of R3.
- B. Remove the static route on R1.
- C. Redistribute the R1 static route to EIGRP.
- D. Change the Administrative Distance of EIGRP to 5.
Answer: B
Explanation:
Section: Mixed Questions
NEW QUESTION # 294
Drag and drop the SNMP attributes in Cisco IOS devices from the onto he correct SNMPv2c or SNMPv3 categories on the right.
Answer:
Explanation:
Explanation
SNMPv2c:
Community string
Username and password
No encryption
SNMPv3:
Authentication
Read-only
privileged
NEW QUESTION # 295
A network administrator must optimize the segment size of the TCP packet on the DMVPN IPsec protected tunnel interface, which carries application traffic from the head office to a designated branch. The TCP segment size must not overwhelm the MTU of the outbound link. Which configuration must be applied to the router to improve the application performance?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 296
Refer to the exhibit.
Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed
Answer:
Explanation:
NEW QUESTION # 297
Refer to the exhibit.
A network engineer is adding a new spoke router into an existing DMVPN Phase 3 tunnel with a hub router to provide secure communication between sites Which additional configuration must the engineer apply to enable the tunnel to come up?
- A. ip nhrpnhs 172.23.5.1
- B. ip nhrp server-only non-caching
- C. ip nhrp responder tunnel
- D. ip nhrp registration no-unique
Answer: A
NEW QUESTION # 298
Refer to the exhibit.
After a security audit, the administrator implemented an ACL in the route reflector. The RR became unreachable from any router in the network. Which two actions resolve the issue? (Choose two.)
- A. Change the next hop of the default route to the link-local address of the default gateway.
- B. Configure a link-local address on the Ethernet0/1 interface.
- C. Remove the ACL entry 80.
- D. Permit ICMPv6 neighbor discovery traffic in the ACL.
- E. Enable the ND proxy feature on the default gateway.
Answer: B,D
NEW QUESTION # 299
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?
- A. Start IP SLA by defining frequency and scheduling it
- B. Start IP SLA by matching numbers for track and ip sla commands
- C. Use the same AD for both default routes
- D. Use the icmp-echo command to track both default routes
Answer: A
NEW QUESTION # 300
Refer to the exhibit.
A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?
- A. Configure an authorized IP address for this user to access this router
- B. Configure full access for the username from TACACS+ server
- C. Configure TACACS+ synchronization with the Active Directory admin group
- D. Configure the username from a local database
Answer: B
NEW QUESTION # 301
What is LDP label binding?
- A. source prefix with label
- B. neighboring router with label
- C. two routers with label distribution session
- D. destination prefix with label
Answer: D
Explanation:
NEW QUESTION # 302
The network administrator configured R1 for Control Plane Policing so that the inbound Telnet traffic is policed to 100 kbps. This policy must not apply to traffic coming in from 10.1.1.1/32 and 172.16.1.1/32. The administrator has configured this:
The network administrator is not getting the desired results. Which set of configurations resolves this issue?
- A. control-plane
no service-policy input PM-CoPP
service-policy input PM-CoPP - B. control-plane
no service-policy input PM-CoPP
!
interface Ethernet 0/0
service-policy input PM-CoPP - C. no access-list 101
access-list 101 deny tcp host 10.1.1.1 any eq 23
access-list 101 deny tcp host 172.16.1.1 any eq 23
access-list 101 permit ip any any
!
interface E0/0
service-policy input PM-CoPP - D. no access-list 101
access-list 101 deny tcp host 10.1.1.1 any eq 23
access-list 101 deny tcp host 172.16.1.1 any eq 23
access-list 101 permit ip any any
Answer: D
NEW QUESTION # 303
Which protocol does MPLS use to support traffic engineering?
- A. Border Gateway Protocol
- B. Resource Reservation Protocol
- C. Label Distribution Protocol
- D. Tag Distribution Protocol
Answer: B
Explanation:
NEW QUESTION # 304
Refer to the exhibit.
The R1 and R2 configurations are:
The neighbor is not coming up. Which two sets of configurations bring the neighbors up? (Choose two.) A)
B)
C)
D)
E)
- A. Option A
- B. Option E
- C. Option C
- D. Option D
- E. Option B
Answer: A,C
Explanation:
NEW QUESTION # 305
......
Cisco 300-410 is a certification exam that is designed to test a candidate’s knowledge and skills in implementing advanced routing and services in an enterprise network. 300-410 exam is aimed at network professionals who have experience in implementing and managing Cisco solutions in a complex network environment. Implementing Cisco Enterprise Advanced Routing and Services certification exam is part of the Cisco Certified Network Professional (CCNP) Enterprise certification track.
Accurate 300-410 Answers 365 Days Free Updates: https://actualanswers.pass4surequiz.com/300-410-exam-quiz.html