NSE6_FAZ-7.2 PDF Dumps | Apr 13, 2024 Recently Updated Questions
NSE6_FAZ-7.2 Exam Questions – Valid NSE6_FAZ-7.2 Dumps Pdf
NEW QUESTION # 16
Which feature can you configure to add redundancy to FortiAnalyzer?
- A. IPv6 administrative access
- B. Primary and secondary DNS
- C. VLAN interfaces
- D. Link aggregation
Answer: D
Explanation:
Link aggregation is a method used to combine multiple network connections in parallel to increase throughput and provide redundancy in case one of the links fail. This feature is used in network appliances, including FortiAnalyzer, to add redundancy to the network connections, ensuring that there is a backup path for traffic if the primary path becomes unavailable.References:The FortiAnalyzer 7.4.1 Administration Guide explains the concept of link aggregation and its relevance to
NEW QUESTION # 17
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned Restricted_User administrative profile.
- B. A trusted host is configured.
- C. fortinet is assigned the Standard_User administrative profile.
- D. ADOM mode is configured with Advanced mode.
Answer: C
Explanation:
If the administrator "fortinet" can view logs and perform device management tasks but cannot create a mail server for alert emails, it is likely due to the administrative profile assigned to them. The Standard_User administrative profile may restrict certain administrative functions, such as creating mail servers. To perform all administrative tasks, including creating mail servers, a higher privilege profile, such as Super_Admin, might be required.References:FortiAnalyzer 7.2 Administrator Guide, "Mail Server" section.
NEW QUESTION # 18
Refer to the exhibit.
Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. These devices cannot participate in the same cluster.
- C. FortiAnalyzer1 and FortiAnalyzer3
- D. FortiAnalyzer2 and FortiAnalyzer3
Answer: B
Explanation:
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster. This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device. For devices to be part of an HA cluster, they would need to havecompatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.
NEW QUESTION # 19
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. LDAP servers IP addresses added as trusted hosts
- B. One or more remote LDAP servers
- C. A local wildcard administrator account
- D. An administrator group
Answer: B,D
Explanation:
To allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group, you must configure one or more remote LDAP servers and an administrator group. First, you configure the LDAP server(s) by specifying the server name, IP, and other details such as the Common Name Identifier and Distinguished Name. Then, you add the LDAP server to a user group. Finally, you create an administrator account that uses this user group for authentication, allowing any user from the specified LDAP group to authenticate.References:FortiAnalyzer 7.2 Administrator Guide, "Configuring remote authentication for administrators using LDAP" section.
NEW QUESTION # 20
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. There is no need to do anything because the disk will self-recover.
- B. Shul down FortiAnalyzer and replace the disk.
- C. Run execute format disk to format and restart the FortiAnalyzer device.
- D. Perform a hot swap of the disk.
Answer: D
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 21
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- B. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- C. The storage connector service does not require a separate license to send logs to the cloud platform.
- D. Fabric connectors allow you to save storage costs and improve redundancy.
Answer: A,C
Explanation:
Fabric connectors in FortiAnalyzer, such as security fabric connectors (e.g., FortiClient EMS, FortiMail, FortiCASB) and storage connectors (e.g., Amazon S3, Azure Blob Container, Google Cloud Storage), provide efficient integration and data sharing capabilities. Using fabricconnectors for direct integration with FortiAnalyzer is more efficient and reliable than relying on third-party applications to poll information through the FortiAnalyzer API. Additionally, the ability to send logs to cloud storage platforms like Amazon S3, Azure Blob, and Google Cloud directly through storage connectors is a built-in feature that does not require an additional license, thus saving on storage costs and improving redundancy without incurring extra licensing fees.References:FortiAnalyzer 7.4.1 Administration Guide, "Fabric Connectors" and "Storage connectors" sections.
NEW QUESTION # 22
Which statement is true about ADOMs?
- A. When a FortiAnalyzer Fabric is implemented, the default ADOM mode is set to advanced.
- B. You can change the ADOM mode only through the GUI.
- C. In normal mode, you cannot change the disk quota of the ADOM after its creation.
- D. A fabric ADOM can include all the device types supported by FortiAnalyzer.
Answer: D
Explanation:
Regarding ADOMs (Administrative Domains) in FortiAnalyzer, a fabric ADOM is capable of including all device types that FortiAnalyzer supports. This is part of the flexibility offered by ADOMs to manage and report on logs from various devices within a Fortinet security fabric. ADOMs can be enabled to support non-FortiGate devices as well, and the root ADOM in Fabric ADOMs provides visibility into all Security Fabric devices. Additionally, it should be noted that in normal mode, you cannot assign different FortiGate VDOMs to different ADOMs, while in advanced mode, you can, which provides a more granular control over the log data from individual VDOMs.References:FortiAnalyzer 7.4.1 Administration Guide, "ADOMs" and
"ADOM device modes" sections.
NEW QUESTION # 23
Which two statements about FortiAnalyzer operating modes are true? (Choose two.)
- A. When in collector mode. FortiAnalyzer offloads the log receiving task to the analyzer.
- B. Analyzer mode is the default operating mode.
- C. For the collector, you should allocate most of the disk space to analytics logs.
- D. When in analyzer mode. FortiAnalyzer supports event management and reporting features.
Answer: B,D
Explanation:
The default operating mode for FortiAnalyzer is analyzer mode. In this mode, FortiAnalyzer provides full functionality for event management and reporting features. This mode is intended for environments where comprehensive analysis and reporting are required. It allows FortiAnalyzer to collect, analyze, and store logs, as well as generate reports and manage events.References:FortiAnalyzer 7.4.1 Administration Guide,
"Operating modes" section.
NEW QUESTION # 24
Which command can you use to find the IP addresses of the devices sending logs to FortiAnalyzer?
- A. diagnose debug applicationoftpd 8
- B. diagnose dvm adorn List
- C. diagnose bestapplicationoftpd 3
- D. diagnose teatapplication miglogd6
Answer: A
Explanation:
The commanddiagnose debug application oftpd 8is used to obtain detailed debug output for the OFTP (Over the FortiGate Protocol) daemon on FortiAnalyzer. This protocol is responsible for the communication and log transfer between FortiGate devices and FortiAnalyzer. By using this debug level, administrators can find information including the IP addresses of devices that are sending logs to FortiAnalyzer.References:FortiOS
7.4.1 Administration Guide, "Diagnostic commands" section.
NEW QUESTION # 25
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Fabric connectors to external LDAP servers.
- B. Configure trusted hosts.
- C. Use administrator profiles.
- D. Limit access to specific virtual domains.
Answer: B,C
Explanation:
To restrict administrative access on FortiAnalyzer, two effective methods are using administrator profiles and configuring trusted hosts. Administrator profiles allow for defining the level of access and permissions for different administrators, controlling what each administrator can seeand do within the FortiAnalyzer unit.
Configuring trusted hosts enhances security by limiting administrative access to specified IP addresses, ensuring that administrators can only connect from approved locations or networks, thus preventing unauthorized access from outside specified subnets or IP addresses.References:FortiAnalyzer 7.4.1 Administration Guide, "Administrators" and "Trusted hosts" sections.
NEW QUESTION # 26
What areanalytics logs on FortiAnalyzer?
- A. Logs that are compressed and saved to a log file
- B. Logs classified as type Traffic, or type Security
- C. Logs that roll over when the log file reaches a specific size
- D. Logs thatare indexed and stored in the SQL
Answer: D
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 27
You finished registering a FortiGate device. After traffic starts to flow through FortiGate. you notice that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?
- A. This FortiGate is part of an HA cluster but it is the secondary device.
- B. This FortiGate model is not fully supported.
- C. FortiGate was added to the wrong ADOM type.
- D. FortiGate does not have logging configured correctly.
Answer: D
Explanation:
When only some of the expected logs from a FortiGate device are being received on FortiAnalyzer, it often indicates a configuration issue on the FortiGate side. Proper logging configuration on FortiGate involves specifying what types of logs to generate (e.g., traffic, event, security logs) and ensuring that these logs are directed to the FortiAnalyzer unit for storage and analysis. If the logging settings on FortiGate are not correctly configured, it could result in incomplete log data being sent to FortiAnalyzer. This might include missing logs for certain types of traffic or events that are not enabled for logging on the FortiGate device.
Ensuring comprehensive logging is enabled and correctly directed to FortiAnalyzer is crucial for full visibility into network activities and for the effective analysis and reporting of security incidents and network performance.
NEW QUESTION # 28
What is true about FortiAnalyzer reports?
- A. The reports from one ADOM are available for all ADOMs.
- B. You require an output profile before reports are generated.
- C. Reports can be saved in a CSV format.
- D. When you enable auto-cache, reports are scheduled by default.
Answer: B
Explanation:
For FortiAnalyzer reports, an output profile must be configured before reports can be generated and sent to an external server or system. This output profile determines how the reports are distributed, whether by email, uploaded to a server, or any other supported method. The options such as auto-cache, saving reports in CSV format, or reports availability across different ADOMs are separate features/settings and not directly related to the requirement of having an output profile for report generation.
NEW QUESTION # 29
......
NSE6_FAZ-7.2 dumps Sure Practice with 32 Questions: https://actualanswers.pass4surequiz.com/NSE6_FAZ-7.2-exam-quiz.html