NS0-593 Dumps PDF 2023 Strategy Your Preparation Efficiently
Latest Verified & Correct Network Appliance NS0-593 Questions
NEW QUESTION # 32
Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS)
capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is
only responding with one data LIF. DDNS is enabled on the domain controllers.
Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose
two.)
- A. Remove the NFS protocol from the cifs_01 data LIF.
- B. Enable the -is-enabledparameter for the SVM DDNS services
- C. Enable the -use-secure parameter for the SVM DDNS services.
- D. Disable the -vserver-fqdn parameter for the SVM DDNS services.
Answer: B,D
NEW QUESTION # 33
A customer reports that while Installing Windows updates on their external Vscan servers, clients couldnot
access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The
customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Enable the -scan-mandatory flag in the Vscan policy.
- B. Disable the -scan-mandatory flag in the Vscan policy.
- C. Modify the CIFS shares to be continuously available (CA) shares.
- D. Update the Vscan servers one at a time.
Answer: A,C
NEW QUESTION # 34
Which two throughput elements are controlled by host applications? (Choose two.)
- A. operation size
- B. Jitter
- C. concurrency
- D. latency
Answer: B,D
NEW QUESTION # 35
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.
Referring to the exhibit, which statement is correct?
- A. Both nodes race to takeover the other, one node will takeover the other node.
- B. No takeover event will occur and NAS data UFs will not be accessible.
- C. NAS data UFs are accessible on only the node that has Epsilon.
- D. All nodes in the cluster reset and NAS data UFs are not accessible after reboot.
Answer: D
NEW QUESTION # 36
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. SnapDrive for UNIX
- B. Host Utilities package
- C. Virtual Storage Console
- D. Inventory Collect Tool
Answer: B
NEW QUESTION # 37
A customer calls you to troubleshoot a network issue. The customer wants to create a packet trace for allclients
on the 192.168.9.0/24 subnet.
Referring to the exhibit, on which interface do you have to run the packet trace?
- A. a0a-322
- B. a0a-456
- C. e2a-100
- D. e2a-1092
Answer: D
NEW QUESTION # 38
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Use the storage takeover command on the storage controller that contains my_data_vol.
- B. Determine the root cause behind the inconsistency before attempting any recovery procedure.
- C. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- D. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume.
Answer: D
NEW QUESTION # 39
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.
What is the cause of the customer's problem?
- A. The cable is plugged in upside down.
- B. The ports are configured for 4x10Gbit instead of 40Gbit.
- C. The port has an incorrect SFP inserted.
- D. The incorrect cable is used.
Answer: B
NEW QUESTION # 40
You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP
instance. After creation, you notice odd behavior in NetApp Cloud Manager.
In this scenario,what Is the reason for this behavior?
- A. The Capacity Management Mode within Cloud Manager should be set to Manual.
- B. Cloud Manager must be used to provision the FlexGroup volume.
- C. The Capacity Management Mode within Cloud Manager should be set to Automatic.
- D. Cloud Volumes ONTAP does not support FlexGroup volumes.
Answer: B
NEW QUESTION # 41
Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC
protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports
that the server's FC HBA port Is online, but the LUN does not show up.
Referring to the exhibit, what is the reason for this problem?
- A. The LUN Is not mapped to the correct SCSI ID.
- B. The zoning on the FC switches Is Incorrect.
- C. The FC service has not been configured on the SVM.
- D. The esxserver igroup contains incorrect IQNs.
Answer: A
NEW QUESTION # 42
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then
report that the session was reestablished.
As shown in the exhibit, what is a cause of this flapping?
- A. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the
same IQN. - B. A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.
- C. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are
accessing the same LUN. - D. A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in
different initiator groups.
Answer: C
NEW QUESTION # 43
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The export policy is not configured properly.
- B. The customer did not configure name services on the SVM.
- C. The clients must be restarted to start using NFSv4.
- D. The ID mapping domains do not match between the client and server.
Answer: A
NEW QUESTION # 44
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is using v4 signatures.
- B. The application is trying to access using the HTTP protocol.
- C. The application is using v2 signatures.
- D. The application is trying to log in as an anonymous user.
Answer: D
NEW QUESTION # 45
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The aggregate is completely full.
- B. The constituent volumes are out ofInodes.
- C. The data placement is uneven.
- D. The constituent volumes are completely full.
Answer: A
NEW QUESTION # 46
You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail
over across subnets.
How would youaccomplish this task?
- A. Configure VIP LIFs using BGP.
- B. Configure an equal number of UFs on each subnet.
- C. Configure a I IF failover policy for each subnet inside a single broadcast domain.
- D. Configure VIP LIFs using OSPF.
Answer: A
NEW QUESTION # 47 
Referring to the exhibit, from which delay center is most of the latency for voll?
- A. Disk
- B. Network
- C. NVRAM
- D. Data
Answer: B
NEW QUESTION # 48
You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size
of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and
you receive anout of apace error message on your host.
What would cause this error?
- A. The maximum number of volume constituents has been reached in the ONTAP software.
- B. The inode limit is exceeded in the ONTAP software.
- C. All constituent volumes are full.
- D. The maxdirsize Is exceeded in the ONTAP software.
Answer: B
NEW QUESTION # 49
You have a customer complaining of long build times from their NetApp ONTAP-based datastores. They
provided you packet traces from the controller and client. Analysis of these traces shows an average service
response time of 1 ms. QoS outputconfirms the same. The client traces are reporting an average of 15 ms in
the same time period.
In this situation, what would be your next step?
- A. A sync core should be triggered.
- B. The client that reports high latency should be investigated.
- C. The cluster is responding slowly and requires further investigation using performance archives.
- D. The cluster interconnects should be investigated.
Answer: B
NEW QUESTION # 50
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
- B. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - C. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
- D. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
Answer: B
NEW QUESTION # 51
You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet
trace.
In this scenario, after you generate the packet trace, where do you find the trace file?
- A. /packet_traces of the node hosting the LIF
- B. /etc/log/packet_traces of the node hosting the LIF
- C. /vol0/paclcet_traces of the CIFS SVM
- D. /etc/log/mlog/packet._traces Of all nodes
Answer: D
NEW QUESTION # 52
You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to
NetApp.
In this scenario, what would solve this Issue?
- A. Verify that your AWScredentials are correctly added to Cloud Manager.
- B. Verify that the inbound and outbound rules allow AutoSupport on port 80.
- C. Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.
- D. Verify that your NetApp Support site credentials are correctly added to Cloud Manager.
Answer: C
NEW QUESTION # 53
......
NS0-593 PDF Dumps Are Helpful To produce Your Dreams Correct QA's: https://actualanswers.pass4surequiz.com/NS0-593-exam-quiz.html