Guaranteed High Marks with Updated & Real 1z0-1075-22 Dumps pdf Free Updates
PASS RATE Manufacturing Cloud 1z0-1075-22 Certified Exam DUMP
Oracle 1z0-1075-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 16
In what three ways can you set the overcompletion tolerance for a subcomponent yield, so the job order can report the excess production completion?
- A. Overcompletion Tolerance Type = Amount,value = 0
- B. Overcompletion Tolerance Type = Percentage, value = 100
- C. Overcompletion Tolerance Type = Amount, value > 0
- D. Overcompletion Tolerance Type = Percentage, value = 0
- E. Overcompletion Tolerance Type = Percentage, value > 0
Answer: A,D,E
NEW QUESTION 17
A Manufacturing Engineer in a plant is creating an alternative manufacturing process for an item using its existing Work Definitions. After copying from the existing Work DefinitionWD1 to the alternative Work Definition WD2, the engineer finds that the operation items were not copied in the alternative manufacturing process WD2.
Identify the reason.
- A. The Production Priority was not populated in the new Work Definition WD2 duringcreation.
- B. The Item and Structure Name were changed in the new Work Definition WD2 during creation.
- C. The StartData was not populated in the new Work Definition WD2 during creation.
- D. The Item and Structure Name in the existing Work Definition WD1 were retained in the new Work Definition WD2 as well during creation.
Answer: C
NEW QUESTION 18
Your customer hasthe following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goodsas one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.
- A. The Work Definition versions can be used to tie the Work Orders.
- B. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
- C. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
- D. The two Work Definitions can be tied through Projector Seiban numbers.
Answer: A
NEW QUESTION 19
Identify two reports that provide work ordercost-related information to the costing user.
- A. Work order Operational Analysis
- B. Cost Accounting Dashboard
- C. WIP Balance by Plant
- D. Purchase Variance Summary
Answer: A,B
NEW QUESTION 20
In your customer's manufacturing facility, different types of Movement Requests are created. Key manufacturing components are issued to the work orders form the manufacturing subinventory. The manufacturing subinventory receives its supplies formthe Warehouse subinventory through automatically created Movement Requests.
Which type of Movement Requests should you use to fill the manufacturing subinventory form the Warehouse subinventory?
- A. Replenishment Requests
- B. Batch Wave Movement Requests
- C. Pick Wave MovementRequests
- D. Requisition Movement Requests
Answer: D
NEW QUESTION 21
A Production operator in your company is required to report production activities, suchas completing or scrapping production units, by referencing a work definition without creating work orders.
Identify the manufacturing transaction that a production operator can perform for reporting such activities.
- A. Movement request
- B. Operation Transactions
- C. Material Transactions
- D. Resource Transactions
- E. Orderless Transactions
Answer: E
NEW QUESTION 22
A plant operates three continuous daily shifts of eight hours each for five days in a week. One unit of the resource R1 within the plant is assigned for two shifts to work area W1. On a particular day in a given week, due to unscheduled maintenance thatneeded to be performed on the resource R1, it was not available for two hours during each of the assigned shifts.
Determine the available capacity of the resource R1 for thatweek.
- A. 76 hours
- B. 70 hours
- C. 78 hours
- D. 60 hours
Answer: C
NEW QUESTION 23
The Plant Manager informs you that they have bought several machines for their manufacturing plant ABC.
The plant has been set up with a separate cost element set ABC in Manufacturing Cloud. You are requested to configure these machines in such away that those are costed to the work order for which operations are performed on these machines.
Identify the correct setup that you will advise to the Plant Manager.
- A. Set up the machines as cost element type of "Overhead" by selecting Cost Element set Common.
- B. Set up the machines as cost element type of "Overhead" by selecting Cost Element set ABC.
- C. Set up the machines as cost element type of "Resource" by selecting Cost Element set Common.
- D. Set up the machines as cost element type of "Resource" by selecting Cost Element set ABC.
Answer: C
NEW QUESTION 24
Identify three entities that must be set up in Oracle Manufacturing Cloud to create a Work Definition for an item that will be manufactured in-house.
- A. Production Line
- B. Operations
- C. Operation Items
- D. Resources
- E. Manufacturing Lead Time
Answer: B,C,D
NEW QUESTION 25
A customer has a distribution warehouse (DW) for After Sales and Service and an in-house manufacturing plant (MP). Sales orders are created and shipped from DW.
Identify the two Sourcing Rules that need to be set for order promising to schedule the order.
- A. Define Local sourcing rule for organization MP: Source Type Transfer To, Source DW
- B. Define Local sourcing rule for organization MP: Source Type Make At, Source MP
- C. Define Local sourcing rule for organization DW: Source Type Make From, Source MP
- D. Define Local sourcing rule for organization DW: Source Type Transfer From, Source MP
Answer: B,D
NEW QUESTION 26
A production Supervisor has noticed that Work Orders created manually are overwritten by the plan runs executed by Planning Central. After discussing this issue with the Planner, two actions are recommended to prevent the Work Orders from being overwritten by plan runs.
Identify the two recommendations.
- A. Update Firm flag in the Details region of the Edit Work Order page.
- B. Update Supply Plan Options, Overwrite Firm Planned Orders = None.
- C. Update Firm flag in the Details region of the Edit Work Definition page.
- D. Update Firm flag in the Details region of the Edit Work Definition Names page.
Answer: A,B
NEW QUESTION 27
As a production supervisor, you require immediate access to critical shop floor execution systems to take actionwhile on the go.
Which four work order related actions can be taken in the Manufacturing Supervisor mobile application?
- A. Reviewing operation, component, and resource detail
- B. Creating a new standard or non standard work order
- C. Releasing work orders using quick swipe details
- D. Searching for work orders and sending them through e-mail
- E. Reviewing customer information of work orders
- F. Executing standard work order and updating item and resource usage
Answer: A,C,D,E
NEW QUESTION 28
Identify the three changes that are allowed to be made to active Work Definition in a Work Center, without creating a new version.
- A. Production Priority
- B. Add an Operation
- C. Costing Priority
- D. Completion Subinventory
- E. Delete an Operation
Answer: A,B,D
NEW QUESTION 29
Identify three requirements fulfilled by nonstandard work orders.
- A. Rescheduling
- B. Rework
- C. Repair
- D. Prototype
Answer: B,C,D
NEW QUESTION 30
Your customer has multiple distribution centers and a few manufacturing plants. Plants make different items with some overlap between them in terms of productsmanufactured. The distribution centers stock parts from all plants. A Corporate Engineering team is responsible for centrally defining items and catalogues. This team defines the items and sets the attributes for most parameters. The respective distribution centers and manufacturing plants are allowed to change some attributes locally.
Identify two different ways of achieving this requirement.
- A. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and CorporateEngineering organization as Inventory Organization.
- B. Set up Plants as Inventory Organizations, Distribution Centers as Inventory Organizations, and Corporate Engineering organizations as Item Organization.
- C. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and Corporate Engineering organization as Item Organization.
- D. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Item Organization
- E. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Inventory Organization.
Answer: B,D
NEW QUESTION 31
......
Best 1z0-1075-22 Exam Preparation Material with New Dumps Questions: https://actualanswers.pass4surequiz.com/1z0-1075-22-exam-quiz.html