2025 D-PE-OE-23 Dumps PDF - D-PE-OE-23 Real Exam Questions Answers
Valid D-PE-OE-23 Test Answers & EMC D-PE-OE-23 Exam PDF
NEW QUESTION # 142
Case Study 4
A company is experiencing a noticeable decrease in performance when accessing data on their Dell EMC Isilon cluster. The cluster hosts Microsoft Windows home directories and general purpose file shares. In addition, a file pool policy moves data that has not been modified in six months to an achieve tier.
The administrator wants your assistance in understanding the reason for the slow data access. The number of users accessing the cluster has not changed. The administrator has shared the following baseline metrics. The outputs were captured from a performance- acceptable time frame.
Trace route shows:
- 3 hops between clients and the cluster
- Average latency is 3 ms
Iperf shows:
- 940 Mb/s average bandwidth
- 005 ms average jitter
Netstat on the local network shows:
- 05% average re-transmission rate
Hostcache list:
- 20 ms average roundtrip time across all clients
The administrator shows you the following iperf output:
- 890 Mb/s average bandwidth
- 98.8 ms average jitter
Based on the output, what information should be provided to the administrator?
- A. Amount of jitter is in an acceptable range
- B. Numbers remain within the recommended range
- C. Lower than average bandwidth needs to be investigated
- D. Amount of jitter is an indication of network congestion
Answer: C
NEW QUESTION # 143
Where is the data stored to allow Easy Restore to successfully complete a system board replacement?
- A. IDSDM card
- B. Internal USB flash
- C. Front control panel
- D. BOSS
Answer: C
NEW QUESTION # 144
How can the ePSA be accessed?
- A. VMware vSphere plug-in
- B. OMSA
- C. Lifecycle Controller
- D. iDRAC
Answer: D
NEW QUESTION # 145
A technician needs to repurpose a server.
What should they do to prepare the server for its new role?
- A. Boot into F10, navigate to Retire or Repurpose Server, and Select Components to be cleared
- B. Boot to Ctrl+S and perform Network Erase
- C. Enable Delete All Settings in the iDRAC Troubleshooting section
- D. Boot into F10, select System Erase, and press 'Y° to confirm erase
Answer: A
NEW QUESTION # 146
The system administrator deployed the Dell PowerEdge server. No iDRAC license was purchased with the server.
Which features are available?
- A. Email alerts, advanced power monitoring, and profile-based configuration
- B. Profile-based configuration, email alerts, and directory services
- C. Remote syslog, two-factor authentication, and zero touch provisioning
- D. Advanced power monitoring, autodiscovery, and virtual folders
Answer: A
NEW QUESTION # 147
A systems engineer needs to configure a RAID volume that combines disk striping across multiple disks with parity for data redundancy. Parity information is stored once and on each disk.
What RAID level does the engineer need to configure?
- A. RAID 6
- B. RAID 3
- C. RAID 1
- D. RAID 5
Answer: D
NEW QUESTION # 148
A technician is troubleshooting a rackmount server that is NOT displaying video.
The technician has the following information:
- Known good monitor does NOT work when plugged into the front VGA port
- The power button is on
- iDRAC has an enterprise license
- The "i" button is blue
- NO operating system is installed on the server
Which two steps should the technician take to troubleshoot the issue? (Choose two.)
- A. Run system diagnostics from the Lifecycle Controller
- B. Perform a cold boot of the system via the iDRAC
- C. Plug the known good monitor to the rear VGA port
- D. Press the "i" button down for 20 seconds to reset the iDRAC
- E. Use iDRAC Virtual Console to check video
Answer: C,E
NEW QUESTION # 149
A new server has 128 GB of RAM and three 1 TB drives. After creating a RAID 5 array with the three internal drives on the system, a technician boots to the Lifecycle Controller to install Windows Server
2016. When the technician tries to select an install location, Windows displays an error message that states that it cannot be installed to that location.
What should the technician do to resolve this issue?
- A. Verify that the license for installing an OS to a virtual disk is installed
- B. Change the boot mode from BIOS to UEFI
- C. Delete the array and use the Lifecycle Controller to configure the array
- D. Bring up the command prompt by pressing shift F10 and use the disk part to clean the disk
Answer: B
NEW QUESTION # 150
A user installed OpenManage Essentials (OME) on a Dell EMC PowerEdge R640 server. OME has discovered, and is currently monitoring, another 30 remote PowerEdge 14G servers.
Each server has the following configuration:
- 2x CPUs
- 384 GB RAM
- 6x 1TB drives in a RAID 6 virtual disk
- No hot spare drive
- PERC
- vFlash
- iDRAC9
- Express license
At 9 PM on Monday evening, one of the remote servers has a disk failure but stays operational. The administrator monitoring OME does not find out about the issue until 5 PM Friday. They place a support call to investigate why OME was not informed about the disk failure before that time.
What is the reason for this issue not being reported to OME?
- A. Remote servers need to have the iDRAC Enterprise license installed to be able to send alerts.
- B. OME only updates its alert database at 5 PM every Friday.
- C. Remote servers are not configured with OME as the trap destination address. OME discovered the issue during a routine status check which is configured to run at 5 PM every Friday.
- D. Remote servers are not configured with OME as the trap destination address. OME was informed of the issue when remote servers sent alerts at 5 PM Friday.
Answer: C
NEW QUESTION # 151
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?
- A. Dispatches technical support from Dell for all Dell servers, storage, and networking devices
- B. Includes onsite monitoring and automated collection of system state information
- C. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
- D. Proactive, predictive, and automated support technology to enable faster resolution and reporting
Answer: D
NEW QUESTION # 152
Which front disk chassis option is available in a Dell EMC PowerEdge R740 server?
- A. 12x 2.5" drives
- B. 24x 2.5" drives
- C. 4x 3.5" drives
- D. 8x 3.5" drives
Answer: D
NEW QUESTION # 153
A Dell EMC PowerEdge server logs the following CPU Machine Check error: CPU1 IERR.
What action might be required to solve the alert?
- A. Clear logs
- B. Update the Intel driver
- C. Swap the PERC controller
- D. Reseat the IDSDM
Answer: B
NEW QUESTION # 154
A user has a drive failure on a server with four identical drives configured in a RAID 5 setup and no spare. The technician arrives and switches the bad drive with an identical new drive and completes a rebuild. A month later the user complains that the RAID configuration is a little slower than it was before the failure.
What action should the technician take?
- A. Check if the firmware on the newly replaced drive matches the existing drives in the RAID configuration
- B. Run a Patrol Read
- C. Power down the server, reseat the backplane cables on each drive then power on the server
- D. Replace the drive that was recently installed
Answer: A
NEW QUESTION # 155
A technician is troubleshooting a server with the following components:
Two CPUs
Memory installed in sockets A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5 and B6 Expansion cards installed in all expansion slots
6x 1 TB drives configured as a RAID 6 virtual disk
The server has the following symptoms:
CPU2 has failed
Memory in slots B1, B2, B3, B4, B5 and B6 is not accessible
Some of the expansion cards have gone offline.
What should the technician do to resolve this issue?
- A. Replace the failing CPU, failing memory, and expansion cards
- B. Replace CPU2
- C. Replace the system board
- D. Reboot the server, access the Lifecycle and re-enable CPU2
Answer: B
NEW QUESTION # 156
A technician needs to replace a server component with orange tabs/releases.
Which two steps should the technician take to complete this task? (Choose two.)
- A. Cold swap the component
- B. Apply anti-static procedures
- C. Remove power cables
- D. Power off the server
- E. Hot swap the component
Answer: B,E
NEW QUESTION # 157
What is required to use the Quick Sync 2 feature?
- A. Type A/A USB cable
- B. NFC
- C. Ethernet connection to iDRAC NIC
- D. OpenManage Mobile app
Answer: D
NEW QUESTION # 158
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. The technician also creates a global hot spare. A drive fails on the second virtual disk.
What is the result?
- A. The global hot spare replaces the failed drive.
- B. The dedicated hot spare for the virtual disk replaces the failed drive.
- C. A copyback operation occurs between the failed drive and the dedicated hot spare.
- D. A copyback operation occurs between the failed drive and the global hot spare.
Answer: A
NEW QUESTION # 159
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in Memory mode.
What is the minimum size DIMM supported for this type of memory?
- A. 64 GB
- B. 256 GB
- C. 128 GB
- D. 512 GB
Answer: C
NEW QUESTION # 160
An administrator is troubleshooting a no power issue on his PowerEdge server. They have confirmed the cable is "known good," and the LED on the PSU is green.
What is the next step in troubleshooting this issue?
- A. Replace the power supply.
- B. Ensure the power supply is RAF.
- C. Disable the PSU hot spare.
- D. Reseat the power supply.
Answer: D
NEW QUESTION # 161
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC8 offers HTML5 based GUI
- B. iDRAC9 default credentials are root/calvin orderable only
- C. iDRAC8 default credentials are customer orderable
- D. iDRAC9 offers HTML5 based GUI
Answer: A
NEW QUESTION # 162
......
D-PE-OE-23 Exam Dumps - PDF Questions and Testing Engine: https://actualanswers.pass4surequiz.com/D-PE-OE-23-exam-quiz.html