Buy Latest Nov 22, 2025 350-401 Exam Q&A PDF - One Year Free Update [Q17-Q32]

Buy Latest Nov 22, 2025 350-401 Exam Q&A PDF - One Year Free Update

Download the Latest 350-401 Dump - 2025 350-401 Exam Questions

NEW QUESTION # 17
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right

Answer:

Explanation:

Explanation

NEW QUESTION # 18
Which component handles the orchestration plane of the Cisco SD-WAN?

A. vEdge
B. vManage
C. vSmart
D. vBond

Answer: D

Explanation:
Explanation
+ Orchestration plane (vBond) assists in securely onboarding the SD-WAN WAN Edge routers into the SD-WAN overlay.
The vBond controller, or orchestrator, authenticates and authorizes the SD-WAN components onto the network.
The vBond orchestrator takes an added responsibility to distribute the list of vSmart and vManage controller information to the WAN Edge routers. vBond is the only device in SD-WAN that requires a public IP address as it is the first point of contact and authentication for all SD-WAN components to join the SD-WAN fabric. All other components need to know the vBond IP or DNS information.

NEW QUESTION # 19
Lab Simulation 10
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks.
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
- All necessary preconfigurations have been applied.
- Do not change the enable password or hostname for any device.
- Save your configurations to NVRAM before moving to the next item.
- Click Next at the bottom of the screen to submit this lab and move to the next question.
- When Next is clicked, the lab closes and cannot be reopened.
Topology

Tasks
Configure logging on SW01 and NetFlow on R01 to achieve these goals:
1. Enable archive logging on SW01 to track each time a change is made to the configuration and the user who made the change.
2. The NetFlow Top Talkers feature has been preconfigured on R01. Enable the feature for all inbound traffic on interface E0/2 of R01.
R01

SW01

Answer:

Explanation:

NEW QUESTION # 20

Refer to the exhibit. An engineer configures CoPP and enters the show command to verify the implementation.
What is the result of the configuration?

A. ICMP will be denied based on this configuration.
B. All traffic will be policed based on access-list 120.
C. Class-default traffic will be dropped.
D. If traffic exceeds the specified rate, it will be transmitted and remarked.

Answer: B

NEW QUESTION # 21
Refer to the exhibit.

Which statement about the OPSF debug output is true?

A. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
B. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
C. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
D. The output displays OSPF hello and LSACK messages which router R1 has sent or received.

Answer: A

Explanation:
Explanation
This combination of commands is known as "Conditional debug" and will filter the debug output based on your conditions. Each condition added, will behave like an 'And' operator in Boolean logic. Some examples of the "debug ip ospf hello" are shown below:

NEW QUESTION # 22
Refer to the exhibit.

Reler to the exhibit The EtherChannel between SW1 and SW2 is not operational. Which a coon will resolve the issue?

A. Configure channel-group 1 mode active on GVO and G1 1 of SW2.
B. Configure twitchport trunk encapsulation dot1q on SW1 and SW2.
C. Configure switchport mode dynamic desirable on SW1 and SW2
D. Configure channel-group 1 mode active on Gl'O and GM of SW1 .

Answer: D

NEW QUESTION # 23
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.

Answer:

Explanation:

NEW QUESTION # 24
Which AP mode allows an engineer to scan configured channels for rogue access points?

A. monitor
B. local
C. bridge
D. sniffer

Answer: A

NEW QUESTION # 25
Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.

Answer:

Explanation:

Explanation

NEW QUESTION # 26
Drag and drop the descriptions from the left onto the QoS components on the right.

Answer:

Explanation:

.

NEW QUESTION # 27
What is a characteristic of MACsec?

A. 802.1AE is bult between the host and switch using the MKA protocol using keys generated via the Diffie-Hellman algorithm (anonymous encryption mode)
B. 802.1AE is bult between the host and switch using the MKA protocol, which negotiates encryption keys based on the master session key from a successful 802.1X session
C. 802.1AE is negotiated using Cisco AnyConnect NAM and the SAP protocol
D. 802.1AE provides encryption and authentication services

Answer: D

Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out-of-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre Shared Key (PSK) framework.

NEW QUESTION # 28
Which exhibit displays a valid JSON file?

Answer: A

NEW QUESTION # 29
A local router shows an EBGP neighbor in the Active state. Which statement is true about the local router?

A. The local router is attempting to open a TCP session with the neighboring router.
B. The local router is receiving prefixes from the neighboring router and adding them in RIB-IN
C. The local router has active prefix in the forwarding table from the neighboring router
D. The local router has BGP passive mode configured for the neighboring router

Answer: A

NEW QUESTION # 30
Refer to the exhibit.

Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?

A. Management VRF
B. Default VRF
C. VRF VPN_B
D. VRF VPN_A

Answer: B

Explanation:
Explanation
There is nothing special with the configuration of Gi0/0 on R1. Only Gi0/0 interface on R2 is assigned to VRF VPN_A. The default VRF here is similar to the global routing table concept in Cisco IOS

NEW QUESTION # 31
Refer to the exhibit.

Refer to the exhibit. An engineer tries to log in to router R1. Which configuration enables a successful login?