Purchase H3C : GB0-381-ENU Exam Materials and then pass exam easily

It is apparent that a majority of people who are preparing for the GB0-381-ENU exam would unavoidably feel nervous as the exam approaching, If you are still worried about the coming exam, since you have clicked into this website, you can just take it easy now, I can assure you that our company will present the antidote for you--our GB0-381-ENU learning materials. Our company has spent more than 10 years on compiling study materials for the exam in this field, and now we are delighted to be here to share our study materials with all of the candidates for the exam in this field. There are so many striking points of our GB0-381-ENU preparation exam. I will just list three of them for you to have a better understanding of our products.

DOWNLOAD DEMO

Considerate after sale service

Together, the after-sale service staffs in our company share a passion for our customers, an intense focus on teamwork, speed and agility, and a commitment to trust and respect for all individuals. At present, our company is a leading global provider of GB0-381-ENU preparation exam in the international market. I can assure you that we will provide considerate on line after sale service for you in twenty four hours a day, seven days a week. Therefore, after buying our GB0-381-ENU study guide, if you have any questions about our study materials, please just feel free to contact with our online after sale service staffs.

Convenient for reading and making notes

Just the same as the free demo, we have provided three kinds of versions of our GB0-381-ENU preparation exam, among which the PDF version is the most popular one. It is understandable that many people give their priority to use paper-based materials rather than learning on computers, and it is quite clear that the PDF version is convenient for our customers to read and print the contents in our GB0-381-ENU study guide. After printing, you not only can bring the study materials with you wherever you go, but also can make notes on the paper at your liberty, which may help you to understand the contents of our GB0-381-ENU learning materials. Do not wait and hesitate any longer, your time is precious!

Free demo available

Perhaps you have had such an unpleasant experience about what you brought in the internet was not suitable for you in actual use, to avoid this, our company has prepared GB0-381-ENU free demo in this website for our customers, with which you can have your first- hand experience before making your final decision. The content of the free demo is part of the content in our real GB0-381-ENU study guide. Therefore, you can get a comprehensive idea about our real study materials. It is convenient for you to download the free demo, all you need to do is just to find the "Download for free" item, and you will find there are three kinds of versions of GB0-381-ENU learning materials for you to choose from namely, PDF Version Demo, PC Test Engine and Online Test Engine, you can choose to download any one as you like.

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. In IS-IS, ______ is divided into two types: Level-1 and Level-2.

A) LSP
B) IIH
C) PSNP
D) CLV
E) CSNP

2. The command to configure manual route aggregation of RIP protocol on MSR router is ___________.

A) Router-Serial1/0] rip summar-address 172.16.0.0 22
B) Router] rip summar-address 172.16.0.0 22
C) Router-rip-1] rip summar-address 172.16.0.0
D) Router-rip-1] rip summar-address 172.16.0.0 22

3. Among the following states of the OSPF protocol, ______ is a stable state.

A) 2-wa
B) Full
C) Down
D) Init

4. In the topology shown in the figure, the following configurations are performed on RTA and RTB respectively:
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
If you need to configure area 2 as an NSSA area, and you need to be able to ping all the interface addresses of the RTA on the RTD, how should you configure it on the RTC and RTD?

A) RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC -ospf-1-area-0.0.0.2]nssa default-route-advertise RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD- ospf-1-area-0.0.0.2]network 20.0.0.0 0.0.0.255 rtd-ospf-1-area-0.0.0.2]nssa
B) RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC -ospf-1-area-0.0.0.2]nssa RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf-1-area -0.0.0.2]network 30.0.0.0 0.0.0.255 rtd-ospf-1-area-0.0.0.2]nssa
C) A.RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC-ospf-1-area-0.0.0.2]nssa RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf-1 -area-0.0.0.2]network 30.0.0.0 0.0.0.255
D) RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC -ospf-1-area-0.0.0.2]nssa default-route-advertise RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD- ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 rtd-ospf-1-area-0.0.0.2]nssa

5. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
RTB] ospf 1 router-id 2.2.2.2
RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
RTB-ospf-1] area 1
RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1] vlink-peer 3.3.3.3
RTC] ospf 1 router-id 3.3.3.3
RTC] ospf 1] import direct
RTC-ospf-1] area 1
RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC-ospf-1-area-0.0.0.1] vlink-peer 2.2.2.2
RTC-ospf-1] area 2
RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD] ospf 1 router-id 4.4.4.4
RTD-ospf-1] area 2
RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
Then the router type in the RTC in the OSPF area is _______

A) ABR
B) Backbone router
C) ASBR
D) Intra-area router

Solutions: